|
|
 |
 |
Sizes and Specifications - Material Specifications
 |
| LADTECH® POLYETHYLENE BLEND #9801 |
| POST CONSUMER, MIXED COLOR, HIGH DENSITY POLYETHYLENE FLAKE |
|
| The following data was developed by LADTECH personnel utilizing the plastic laboratory of Hennepin Technical College, Brooklyn Park, MN in June of 1998. |
| PROPERTY |
ASTM |
VALUE |
UNITS |
| Melt Index |
D 1238 |
.49 |
G/10 min. |
| Density |
*Estimated |
.94 - .96 |
G/cm2 |
| Tensil Strength @yeild |
D 638 |
3,453 |
PSI |
| Elongation @yeild |
D 638 |
122 |
% |
| Flexural Modulus |
D 790 |
147,771 |
PSI |
| Izod Impact Strength |
D 256 |
7.12 |
Ft-lb/in |
| Hardness (shore D) |
D 2240 |
63.1 |
-- |
| Head Deflection Temp |
D 648 |
174°F |
@66 PSI |
| Shrinkage |
D 955 |
.032 |
in/in |
|
| The above data is representative of LADTECH primary-use blend polyethylene. This blend is produced from 100% recycled polyethylene. The predominate source product for the raw plastic is curbside collected, post-consumer, blow molded milk jugs, detergent bottles and injection molded thin-wall containers. The material is shredded, washed, dried, and sized to LADTECH specifications. |
|
Designs and Specifications
|
24", 27", 30" 32" & 34" Diameter Rings
24" x 24" and 24" x 36" Catch Basin |
 |
THICKNESS/HEIGHT OPTIONS AVAILABLE:
(dependent upon diameter as follows) |
 |
24" & 27"
1 1/4", 1 1/2", 2", 4" flat and 1 1/2" Slope |
|
30"
1 1/2", 2 1/4", 4" flat and 2 1/4" Slope |
|
32" & 34"
2", 3" flat and 2 1/4" Slope |
|
24"x 36" Catch Basin
1 1/2", 2", 2 3/4" flat and 1 1/2" Slope |
|
24"x 24" Catch Basin
1 1/2", 2", 2 3/4" flat and 2 3/4" Slope |
|
|
 |
 |
 |
|
