Our Process - Recycling
 |
HELP RECYCLE THE POST CONSUMER
CURB-SIDE WASTE WITHIN YOUR COMMUNITY. |
| Support recycling efforts within your community by specifying products manufactured from curb-side collected post-consumer plastic waste. |
| The vast majority of products manufactured from recycled materials are those used in packaging. As such, they will eventually end up in the solid waste stream again. Each time this material cycles through the process, some if it will end up in the landfill and some of it will deteriorate to an unacceptable level for reuse. Even the most successful recycling efforts (approximately 80% for the aluminum can industry) fall short of keeping 100% of their manufacturing materials out of our landfills. |
| LADTECH, Inc. optimizes the recycling effort by utilizing 100% recycled material in its plastic adjustment rings. LADTECH, Inc. manufactures its rings from curb-side collected, post-consumer, high density polyethylene (HDPE) plastic. This material is thus diverted from the solid waste stream, and will never reappear as another consumer waste package. The plastic adjustment rings are used in both the national and international infrastructures, and have an expected service life of 100 years. |
| NOW THAT IS RECYCLING! |
 |
| FACT: It takes approximately 52 milk jugs/detergent bottles to supply enough plastic to manufacture one, 2" LADTECH, Inc. Adjustment Ring. This waste material is diverted from our landfills and will not reappear in the waste stream as another discarded bottle. |
